Note/IllustrationAction
xx1900001913
Fit the conveyor tracking module and
push the lower part until you hear a clear
clicking sound.
4
xx2200001844
Connect:
• B1.X7 - K4.X1-X5
5
See Application manual - Conveyor tracking.Connect wires to the input and output
connectors as required.
6
Closing the door on page 183.Close the door.7
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
8
For more information about the option Conveyor Tracking, see Application
manual - Conveyor tracking.
Product manual - OmniCore V400XT 137
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the conveyor tracking module (CTM)
Continued
To Next Page
Loading...
