Note/IllustrationAction
xx2200001972
Push the digital base into the bracket
until you hear a clear clicking sound.
3
Reconnect any connectors disconnected
at removal.
4
Concluding procedure
Note/IllustrationAction
Closing the door on page 183.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
2
230 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.7 Replacing the safety digital base device
Continued
To Next Page
Loading...
