Note/IllustrationAction
xx2200001844
Pull on the lower side of the conveyor
tracking module slightly and take out the
conveyor tracking module.
Note
The conveyor tracking module is secured
by the buckles.
Be careful with the direction of the
buckles when doing assembling/disas-
sembling work.
2
xx1900001913
Refitting the conveyor tracking module (option)
Refitting the conveyor tracking module (option)
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Continues on next page
274 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.16 Replacing the conveyor tracking module (CTM)
Continued
To Next Page
Loading...
