Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
2
xx2300001842
xx1900001913
Hang the conveyor tracking module into
the bracket and push the lower of it until
you hear a clear clicking sound.
3
xx2200001844
Reconnect any connectors disconnected
at removal.
4
Continues on next page
Product manual - OmniCore V400XT 275
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.16 Replacing the conveyor tracking module (CTM)
Continued
To Next Page
Loading...
