Note/IllustrationAction
Screws: Torx pan head screw M4x8 (3 pcs)Secure it with the screws.7
Tightening torque: 1.7 Nm±10%.
xx2300001846
Concluding procedure
Note/IllustrationAction
Closing the door on page 183.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
2
300 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.3 Replacing the HMI signal (FlexPendant) connector
Continued
To Next Page
Loading...
