ABB OmniCore V400XT - Page 304

Note/IllustrationAction
xx1900002333
Take out the cables withe the cable entry
frame through the cut-out.
2
xx1900002334
Remove the attachment screws on the
frame and cover strip together.
3
xx1900002335
Remove the cover strip from the frame.4
Continues on next page
304 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the cable grommet assembly
Continued