ABB OmniCore V400XT - Page 303

Note/IllustrationAction
xx2100000845
Remove the attachment screws on the
cover.
2
Push the cable grommet assembly into
the cabinet.
3
Take the cable grommet assembly out.4
Releasing the cables from the cable grommet assembly
Note/IllustrationAction
xx1900002332
Unscrew the cable entry frame from the
enclosure wall.
1
Continues on next page
Product manual - OmniCore V400XT 303
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the cable grommet assembly
Continued