Note/IllustrationAction
xx2100000852
Secure it with the locking ring.4
Reconnect any connectors disconnected
at removal.
5
Secure the Ethernet outlet connector with
cables with the clips on the cabinet.
Tip
Use the same position as from removing
the harness ETH outlet with cable.
6
Concluding procedure
Note/IllustrationAction
Closing the door on page 183.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
2
Product manual - OmniCore V400XT 315
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.5 Replacing the Ethernet outlet connector with cable
Continued
To Next Page
Loading...
