Note/IllustrationAction
Open the cover.
CAUTION
Clean cover from metal residues before
opening.
Metal residues can cause shortage on
the boards which can result in hazardous
failures.
5
Disconnect all connectors from the unit
to be replaced.
6
xx2300001705
Remove the screws at the front of the
box.
7
Push the measurement unit inwards and
lift out of the box.
8
xx2300001706
Remove the attachment screws from the
mounting plate.
9
Pull out the measurement unit.10
Continues on next page
332 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the measurement unit
Continued
To Next Page
Loading...
