120 PCS100 AVC-20 User Manual
A generic range of ABB LV power converter products.
Positive Temperature Coefficient temperature sensor.
System Configuration Module. A small circuit board located inside the master module.
When the PCS100 product powers up the SCM checks the SW revisions and the
hardware configuration (i.e., the number of inverter and rectifier modules).
The name of the high-speed serial communications bus protocol used by the different
modules in the PCS100 products to communicate to each other. These modules are the
Master Module, Inverter Module, Rectifier Module, SCM and GDM.
The name of the driver software for the Vcan bus
Slave Stack Interface Board (located in an inverter or rectifier module)
Voltage Transformer or potential transformers (PT) for metering and protection in
high/medium-voltage circuits
Table 17-1: Glossary
17.5 Open-Source Software
This product incorporates software from open-source communities. For more information refer to the
document 2UCD200000E041 PCS100 Open-Source Software Information.
17.6 Power Termination Details
The following table and drawings define the PCS100 AVC-20 Injection Transformer terminations - Customer
connections for supply and load. Following aberrations are used in descriptions:
TP Standard termination palm
TPI IEC termination palm option
TPN NEMA termination palm option
Table 17-2: PCS100 AVC-20 termination details
To Next Page
Loading...
