ABB PCS100 AVC-20 - Menu 0 General

PCS100 AVC-20 User Manual 55
8.3.2 Menu 0 General
0 General
The menu contains general system parameters
Parameter:
00 Password
Function:
To enable or disable access to the Operator menu or the Tech menu.
Access:
Continuous
Note
Enter 159 to access the Operator menu.
Parameter:
01 Date and Time
Function:
To enter the date and time.
Format:
YYYY-MM-DD HH:MM: SS
Access:
Operator
Parameter:
02 Customer Name
Function:
Company name entry which is displayed on the Product Page (see section 6.1.4.2) and
the downloaded event log.
Access:
Operator
Parameter:
03 Plant Name
Function:
Plant name entry which is displayed on the Product Page (see section 6.1.5) and the
downloaded event log.
Access:
Operator
Parameter:
04 Site Name
Function:
Site name entry which is displayed on the Product Page (see section 6.1.5) and the
downloaded event log.
Access:
Operator
Parameter:
05 System Reboot
Function:
Restarts all functions within two minutes.
Access:
Operator
Range:
True / False
Setting Up:
Select “True” to reboot the PCS100 AVC-20. The parameter will automatically set back to
“False” once the PCS100 AVC-20 has rebooted. Event 209 will be displayed in the event
log.
Parameter:
06 Reset Power Quality
Function:
Clears the power quality events recorded in the Summary Page.
Access:
Operator
Range:
True / False
Setting Up:
Select “True” to clear the PQ events. The parameter will automatically return to “False”
once the events have been cleared.
Note:
This parameter does not clear the events recorded in the Event Log.
Parameter:
07 System SW Version
Function:
Version of the software in the SCM
Default value
* Note: * specifies the latest version of the software
Access:
Tech
Note:
The value of this parameter should be changed under advice from the factory only.
To view the current running system software version, refer the section 8.3.5 Menu 3
Product Revision