ABB PCS100 AVC-20 - Page 53

PCS100 AVC-20 User Manual 53
Graphic Display
GDM A00
Display
A31
GDM Control Enable
A62
Screen Saver Time
54
A63
SSH Port Enable
A64
Firmware Upload
Enable
GDM B00
Network Settings
B11
Dynamic IP DHCP
B14
Static IP gateway
55
B12
Static IP address
B15
Apply settings
B13
Static IP mask
GDM C00
Network Status
C11
Actual DHCP active
C14
Actual IP gateway
55
C12
Actual IP address
C15
MAC address
C13
Actual IP mask
C16
Ethernet Status
GDM D00
Product Revision
D11
GDMIB boot product
D21
GDM revision
56
D12
GDMIB boot revision
D31
V
canserver
name
D13
GDMIB product
D32
V
canserver
revision
D14
GDMIB revision
Table 8-1: GDM Menu Index Table
Note:
Menus 4 Analog I/O and 5 Digital I/O shown in GDM Menu Page (Figure 8-1) are related to optional
Extended I/O board and are not used with standard PCS100 AVC-20 operation and thereby not described in
this document.
Parameter listing and description of Menus 4 Analog I/O and 5 Digital I/O are shown in separate document
related to Extended I/O board.