Operation Manual / Power2 850-M / 4.1 Low-pressure stage
Page 12 /
© Copyright 2015 ABB. All rights reserved.
Tightening torques for assembly devices
Unless described otherwise, the screws and nuts of the assembly devices supplied by ABB
Turbo Systems must be tightened so they rest firmly against the surface.
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
Devices that are fitted on the low-pressure or high-pressure stage in order to obtain a
suspension point. Assembly devices are specially constructed and designed for the
defined use; they are not trading goods. Use assembly devices only for the described
applications.
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting gear
is not supplied by ABB Turbo Systems.
To Next Page
Loading...
