ABB Power2 850-M16 - Rating Plate of the High-Pressure and Low-Pressure Stage

Operation Manual / Power2 800-M / 2 Safety
1 Safety / 1.8 Rating plate of the high-pressure and low-pressure stage
© Copyright 2018 ABB. All rights reserved. HZTL4025_EN Revision A March 2018
1.8 Rating plate of the high-pressure and low-
pressure stage
Fig.2: Rating plate
Operating limits
1 Operating limits at engine overload (110 %). In test rig operation only, unless otherwise
agreed with the enginebuilder.
2 Operating limits during operation
Table3
Recommended replacement intervals
3 Replacement interval of plain bearings in 1000 h
4 Replacement interval of compressor in 1000 h
5 Replacement interval of turbine in 1000 h
Table4
Further data
6 Power2 designation
7 Power2 serial number
8 Power2 stage
9 Serial number of the low or high-pressure stage
10 Year of construction of the low or high-pressure stage
11 Weight of the low or high-pressure stage
12 Part number of the customer of the low or high-pressure stage
Table5
Page 7 / 17