ABB Power2 850-M16 - Table of Tightening Torques

Operation Manual / Power2 850-M / 4.2 High-pressure stage
4 Disassembly and assembly / 4.14 Table of tightening torques
© Copyright 2017 ABB. All rights reserved. HZTL4063_EN Revision A August 2017
4.14 Table of tightening torques
Fig.23: Tightening torques
The following tightening torques [Nm] must be observed for the designated screw fittings:
Part number Thread and tightening torque
42099 M12x80
80 Nm
56017 M8 Tx40
25 Nm
61090 M12
120 Nm
61090 (nuts that are difficult to access) Pre-tightening torque 40 Nm
Tightening angle 40° ±5°
72002 M12x95
50 Nm
72004 M12
120 Nm
82022 M12x45
210 Nm
Table13: Tightening torques
Page 27 / 35