52 OI/FEP610/FEH610-EN Rev. B | ProcessMaster FEP610, HygienicMaster FEH610
Menu / parameter Description
Device Info / ...Transmitter
Transmitter Type Type of transmitter, e. g. FEx610.
Transmitter ID ID number of transmitter.
Transm.Serial No. Serial number of transmitter.
...Transmitter Version Selection of submenu "...Transmitter Version" using .
Transm. Run Hours Run hours of the transmitter.
Tx Restart Counter Number of device restarts (cyclings of the power supply off and on).
Time since Restart Device operating hours since the last restart.
...Tx Calibration Selection of submenu "...Tx Calibration" using .
Manufacturer Name of manufacturer.
Street Manufacturer's address (street).
City Manufacturer's address (city).
Phone Manufacturer's address (phone number).
Device Info / ...Transmitter / ...Transmitter Version
FW Device Ver. Version and item number of device software package.
FW Device Part Nr.
FW Frontend Ver. Version and checksum (CRC) of frontend board (FEB) software.
FW Frontend CRC
HW Frontend Ver. Hardware version of frontend board (FEB).
Bootloader FEB Ver. Version of frontend board (FEB) bootloader.
Curr. Out FW Ver. Current output module software version and checksum (CRC).
Curr. Out FW CRC
Device Info / ...Transmitter / ...Tx Calibration
TX Span Calibration value of the transmitter.
TX Zero
First Cal. Date Date of first calibration of transmitter (calibration of new device).
Last Cal. Date Date of last calibration of transmitter.
Cal. Cert. No. Identification (number) of the relevant calibration certificate.
First Cal. Location Place of first calibration of transmitter.
Last Cal. Location Place of last calibration of transmitter.
To Next Page
Loading...
Need help?
General
