ABB Relion 615 series - Using the Local HMI for Monitoring; Recorded Data

Indicator Description
QC-kVAr Reactive power, magnitude of instantaneous value, phase C
PFA2 Power factor, magnitude of instantaneous value, phase A
PFB2 Power factor, magnitude of instantaneous value, phase B
PFC2 Power factor, magnitude of instantaneous value, phase C
PA2-kW Active power, magnitude of instantaneous value, phase A
PB2-kW Active power, magnitude of instantaneous value, phase B
PC2-kW Active power, magnitude of instantaneous value, phase C
SA2-kVA Apparent power, magnitude of instantaneous value, phase A
SB2-kVA Apparent power, magnitude of instantaneous value, phase B
SC2-kVA Apparent power, magnitude of instantaneous value, phase C
QA2-kVAr Reactive power, magnitude of instantaneous value, phase A
QB2-kVAr Reactive power, magnitude of instantaneous value, phase B
QC2-kVAr Reactive power, magnitude of instantaneous value, phase C
VAB-kV Measured phase-to-phase voltage amplitude phase AB
VBC-kV Measured phase-to-phase voltage amplitude phase BC
VCA-kV Measured phase-to-phase voltage amplitude phase CA
VAB2-kV Measured phase-to-phase voltage amplitude phase AB
VBC2-kV Measured phase-to-phase voltage amplitude phase BC
VCA2-kV Measured phase-to-phase voltage amplitude phase CA
V1-kV Measured positive-sequence voltage
V2-kV Measured negative-sequence voltage
V0-kV Measured zero-sequence voltage
V1B-kV Measured positive-sequence voltage
V2B-kV Measured negative-sequence voltage
V0B-kV Measured zero-sequence voltage
6.1.2.2 Using the local HMI for monitoring
1. Select Main menu/Measurements to monitor measured and calculated values.
The list of protection relay's basic measurements is shown.
2.
Scroll the view with
and .
6.1.3 Recorded data
The protection relay is provided with intelligent and flexible functionality that collects
different kinds of data. The recorded data gives substantial information for post fault
analysis.
1MAC054853-MB B Section 6
Operating procedures
615 series ANSI 93
Operation Manual