ABB Relion 615 series - Changing Single-Line Diagram Symbol Formats; Browsing Setting Values

4.1.10.1 Changing single-line diagram symbol formats
1.
Select Main menu/Configuration/HMI/SLD symbol format and press .
2.
Change symbol format with or .
3.
Press to confirm the selection.
GUID-7350C17D-3F8A-476E-BF3D-EBDB690BF941-ANSI V1 EN
Figure 20: Selecting ANSI as single-line diagram symbol format
4.1.11 Browsing setting values
1.
Select Main menu/Settings/Settings and press .
2.
Select the setting group to be viewed with
or .
Section 4 1MAC054853-MB B
Using the HMI
48 615 series ANSI
Operation Manual