A071146-ANSI V2 EN
Figure 64: Monitoring fault records
6.1.3.5 Monitoring events
Event view contains a list of events produced by the application configuration. Each event
takes one view area. The header area shows the currently viewed event index and the total
amount of the events. The most recent event is always first.
The HMI Event Filtering tool can be used to configure the event visibility
in the LHMI.
1. Select Main Menu/Events.
2.
Press to view the first event.
Date, time, device description, object description and event text elements of the
event are shown.
3.
Press or to scroll the view.
Section 6 1MAC054853-MB B
Operating procedures
96 615 series ANSI
Operation Manual
To Next Page
Loading...
