GUID-C78B4218-3979-41ED-8B4E-83EACC433182-ANSI V1 EN
Figure 32: Viewing the single-line diagram with ANSI symbols
4.2.6 Showing parameters
Some function blocks have a function-specific On/Off setting. When the function setting
is “Off”, all settings are hidden and when the function setting is “On”, all settings are
visible based on the other visibility and hiding rules.
Switch a function block on or off via the Operation parameter under the
required function block.
1MAC054853-MB B Section 4
Using the HMI
615 series ANSI 59
Operation Manual
To Next Page
Loading...
