• The DFR records view shows the list of disturbance records.
• The Fault records view shows the list of fault records.
• The Single Line Diagram view shows the single-line diagram.
• The Report summary page allows to save events, fault records, disturbance
records, the load profile record and the parameter list.
• The Import/Export page allows to import and export parameters settings.
• Logout ends the session.
A070945-ANSI V2 EN
Figure 30: Navigating in Web HMI menus
4.2.4.1 Menu structure
The Main menu contains main groups which are divided further into more detailed
submenus.
• Control
• Events
• Measurements
• DFR records
• Settings
• Configuration
• Monitoring
1MAC054853-MB B Section 4
Using the HMI
615 series ANSI 57
Operation Manual
To Next Page
Loading...
