ABB Relion 615 series - Creating Digital Fault Records; Monitoring DFR Data

• DFR records
• Fault records
• Events
• Load profile record
6.1.3.1 Creating digital fault records
Normally DFR recordings are triggered by the protection relay applications but the
recording can also be triggered manually.
1. Select Main menu/DFR records.
2.
Select Trig recording with
or .
3.
Press , change the value with or and press again.
A070861-ANSI V2 EN
Figure 62: Changing the value
The DFR recorder is now triggered.
6.1.3.2 Monitoring DFR data
Upload individual disturbance recordings from the protection relay with the PCM600
software to monitor DFR data.
1. Select Main menu/DFR records.
All the DFR information is listed.
2.
Scroll the view with
or .
The following items are listed in the view:
Section 6 1MAC054853-MB B
Operating procedures
94 615 series ANSI
Operation Manual