ABB Relion 615 series - Monitoring an Internal Relay Fault

A071264-ANSI V2 EN
Figure 60: Indication message
6.1.1.2 Monitoring an internal relay fault
The flashing green LED indicates an internal relay fault. Internal relay fault messages are
shown in a dialog box. Only one dialog box can be shown at a time, therefore the relay has
internal priority for indication messages and tripping data. Internal fault has always higher
priority than a warning.
See the troubleshooting section for more details.
A071144-ANSI V1 EN
Figure 61: Fault indication
Section 6 1MAC054853-MB B
Operating procedures
90 615 series ANSI
Operation Manual