Fault indication Fault code Additional information
Internal Fault
SO-relay(s),X130
46 Faulty Signal Output relay(s) in card
located in slot X130.
Internal Fault
PO-relay(s),X100
53 Faulty Power Output relay(s) in card
located in slot X100.
Internal Fault
PO-relay(s),X110
54 Faulty Power Output relay(s) in card
located in slot X110.
Internal Fault
PO-relay(s),X120
55 Faulty Power Output relay(s) in card
located in slot X120.
Internal Fault
PO-relay(s),X130
56 Faulty Power Output relay(s) in card
located in slot X130.
Internal Fault
Light sensor error
57 Faulty ARC light sensor input(s).
Internal Fault
Conf. error,X000
62 Card in slot X000 is wrong type, is missing,
does not belong to original configuration or
card firmware is faulty.
Internal Fault
Conf. error,X100
63 Card in slot X100 is wrong type or does not
belong to the original composition.
Internal Fault
Conf. error,X110
64 Card in slot X110 is wrong type, is missing
or does not belong to the original
composition.
Internal Fault
Conf. error,X120
65 Card in slot X120 is wrong type, is missing
or does not belong to the original
composition.
Internal Fault
Conf.error,X130
66 Card in slot X130 is wrong type, is missing
or does not belong to the original
composition.
Internal Fault
Card error,X000
72 Card in slot X000 is faulty.
Internal Fault
Card error,X100
73 Card in slot X100 is faulty.
Internal Fault
Card error,X110
74 Card in slot X110 is faulty.
Internal Fault
Card error,X120
75 Card in slot X120 is faulty.
Internal Fault
Card error,X130
76 Card in slot X130 is faulty.
Internal Fault
LHMI module
79 LHMI module is faulty. The fault indication
may not be seen on the LHMI during the
fault.
Internal Fault
RAM error
80 Error in the RAM memory on the CPU
card.
Internal Fault
ROM error
81 Error in the ROM memory on the CPU
card.
Internal Fault
EEPROM error
82 Error in the EEPROM memory on the CPU
card.
Table continues on next page
Section 7 1MAC054853-MB B
Troubleshooting
112 615 series ANSI
Operation Manual