ABB Relion 615 series - Page 149

A071168-ANSI V2 EN
Figure 90: Selecting the setting group value
Only values within the selected setting group can be changed.
7.
Press
or to change the value and to confirm the selection.
A070922-ANSI V2 EN
Figure 91: Editing the setting group value
The active setting group is indicated with an asterisk * .
Switching the Operation parameter of a function block on or off restarts
all control and protection functions.
Activating a setting group
Protection relay settings are planned in advance for different operation conditions by
calculating setting values to different setting groups. The active setting group can be
changed by the protection relay application or manually from the menu.
1.
Select Main menu/Settings/Setting group/Active group and press .
1MAC054853-MB B Section 8
Commissioning
615 series ANSI 141
Operation Manual