3.3 Control and monitoring functions
GUID-E3777F16-0B76-4157-A3BF-0B6B978863DE v21
IEC 61850 or
function name
ANSI Function description Transformer
RET670
(Customized)
Control
SESRSYN 25 Synchrocheck, energizing check and synchronizing 0-6
SMBRREC 79 Autorecloser 1
APC15 3 Control functionality for a single bay, max 15 objects (2CB), including interlocking
(see T
able 4)
APC30 3 Control functionality for up to 6 bays, max 30 objects (6CBs), including
interlocking (see T
able
5)
0-1
QCBAY Bay control 1+5/APC30
LOCREM Handling of LR-switch positions 1+5/APC30
LOCREMCTRL LHMI control of PSTO 1
SXCBR Circuit breaker 18
TR1ATCC 90 Automatic voltage control for tap changer, single control 0-4
TR8ATCC 90 Automatic voltage control for tap changer, parallel control 0-4
TCMYLTC 84 Tap changer control and supervision, 6 binary inputs 0-4
TCLYLTC 84 Tap changer control and supervision, 32 binary inputs 0-4
SLGAPC Logic rotating switch for function selection and LHMI presentation 15
VSGAPC Selector mini switch 30
DPGAPC Generic communication function for Double Point indication 32
SPC8GAPC Single point generic control function, 8 signals 5
AUTOBITS Automation bits, command function for DNP3.0 3
SINGLECMD Single command, 16 signals 8
I103CMD Function commands for
IEC 60870-5-103
1
I103GENCMD Function commands generic for
IEC 60870-5-103
50
I103POSCMD IED commands with position and select for
IEC 60870-5-103
50
I103POSCMDV IED direct commands with position for
IEC 60870-5-103
50
I103IEDCMD IED commands for
IEC 60870-5-103
1
I103USRCMD Function commands user defined for
IEC 60870-5-103
4
Secondary
system
supervision
Table continues on next page
Section 3 1MRK 504 165-UUS Rev
. J
Available functions
32 T
ransformer protection RET670
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
