IEC 61850 or function
name
ANSI Function description Transformer
RET670
(Customized)
IEC 61850SIM IEC 61850 simulation mode 1
GOOSEBINRCV GOOSE binary receive 16
GOOSEDPRCV GOOSE function block to receive a double point value 64
GOOSEINTRCV GOOSE function block to receive an integer value 32
GOOSEMVRCV GOOSE function block to receive a measurand value 60
GOOSESPRCV GOOSE function block to receive a single point value 64
VCTRSEND Horizontal communication via GOOSE for VCTR 1
GOOSEVCTRRCV Horizontal communication via GOOSE for VCTR 7
GOOSEVCTRCONF GOOSE VCTR configuration for send and receive 1
ALGOS Supervision of GOOSE subscription 100
MULTICMDRCV,
MUL
TICMDSND
Multiple command and transmit 60/10
AGSAL Generic security application component 1
LD0LLN0 IEC 61850 LD0 LLN0 1
SYSLLN0 IEC 61850 SYS LLN0 1
LPHD Physical device information 1
PCMACCS IED configuration protocol 1
SECALARM Component for mapping security events on protocols such as DNP3 and IEC103 1
FSTACCSNA Field service tool access via SPA protocol over Ethernet communication 1
FSTACCS Field service tool access 1
IEC 61850-9-2 Process bus communication, 8 merging units 0-1
ACTIVLOG Activity logging 1
ALTRK Service tracking 1
PRP IEC 62439-3 Parallel redundancy protocol 0-1
HSR IEC 62439-3 High-availability seamless redundancy 0-1
RSTP Rapid spanning tree protocol 0-1
PMUCONF
PMUREPOR
T
PHASORREPORT1
PHASORREPORT2
PHASORREPORT3
ANALOGREPORT1
BINARYREPORT1
SMAI1 - SMAI12
3PHSUM
PMUSTATUS
Synchrophasor report, 24 phasors (see Table
8) 0-1
AP_1-AP_6 AccessPoint_ABS 1
AP_FRONT Access point front 1
PTP Precision time protocol 1
ROUTE_1-ROUTE_6 Route_ABS 1
Table continues on next page
1MRK 504 165-UUS Rev. J Section 3
Available functions
T
ransformer protection RET670 39
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
