IEC 61850 or function
name
ANSI Function description Transformer
RET670
(Customized)
FRONTSTATUS Access point diagnostic for front Ethernet port 1
SCHLCCH Access point diagnostic for non-redundant Ethernet port 6
RCHLCCH Access point diagnostic for redundant Ethernet ports 3
DHCP DHCP configuration for front access point 1
Remote communication
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
Binary signal transfer, receive 3/3/6
BinSignTrans1_1
BinSignT
rans1_2
BinSignTransm2
Binary signal transfer, transmit 3/3/6
BSR2M_305
BSR2M_312
BSR2M_322
BSR2M_306
BSR2M_313
BSR2M_323
Binary signal transfer, 2Mbit receive 1
BST2M_305
BST2M_312
BST2M_322
BST2M_306
BST2M_313
BST2M_323
Binary signal transfer, 2Mbit transmit 1
LDCMTRN Transmission of analog data from LDCM 1
LDCMTRN_2M_305
LDCMTRN_2M_306
LDCMTRN_2M_312
LDCMTRN_2M_313
LDCMTRN_2M_322
LDCMTRN_2M_323
Transmission of analog data from LDCM, 2Mbit 1
LDCMRecBinStat1
LDCMRecBinStat3
Receive binary status from remote LDCM 6/3
LDCMRecBinStat2 Receive binary status from LDCM 3
LDCM2M_305
LDCM2M_312
LDCM2M_322
Receive binary status from LDCM, 2Mbit 1
LDCM2M_306
LDCM2M_313
LDCM2M_323
Receive binary status from remote LDCM, 2Mbit 1
Scheme communication
ZCPSCH 85 Scheme communication logic for distance or overcurrent protection 0-2
ZPCPSCH 85 Phase segregated scheme communication logic for distance protection 0-2
ZCRWPSCH 85 Current reversal and weak-end infeed logic for distance protection 0-2
ZPCWPSCH 85 Current reversal and weak-end infeed logic for phase segregated communication 0-2
Table continues on next page
Section 3 1MRK 504 165-UUS Rev
. J
Available functions
40 T
ransformer protection RET670
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
