ABB ret650 - Monitored Data; Settings; Denial of Service, Frame Rate Control for LAN1 Port DOSLAN1

17.16.2.4 Settings
The function does not have any parameters available in the local HMI or PCM600.
17.16.2.5 Monitored data
Table 512: DOSFRNT Monitored data
Name Type Values (Range) Unit Description
State INTEGER 0=Off
1=Normal
2=Throttle
3=DiscardLow
4=DiscardAll
5=StopPoll
-
Frame rate control state
Quota INTEGER - % Quota level in percent
0-100
IPPackRecNorm INTEGER - - Number of IP packets
received in normal mode
IPPackRecPoll INTEGER - - Number of IP packets
received in polled mode
IPPackDisc INTEGER - - Number of IP packets
discarded
NonIPPackRecNorm INTEGER - - Number of non IP
packets received in
normal mode
NonIPPackRecPoll
INTEGER - - Number of non IP
packets received in
polled mode
NonIPPackDisc
INTEGER - - Number of non IP
packets discarded
17.16.3 Denial of service, frame rate control for LAN1 port DOSLAN1
17.16.3.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Denial of service, frame rate control for
LAN1 port
DOSLAN1 - -
Section 17 1MRK 504 135-UEN A
Basic IED functions
598
Technical manual