Accu-Chek ACTIVE User Manual

33
Testing blood glucose
5 Check that this code number is the same as the
code number on the label of the test strip con-
tainer.
If the numbers do not match, even though the code
chip in the meter is the one that belongs to the test
strip container, please contact your customer sup-
port and service centre.
Following the code number, the test strip symbol and
the ashing blood drop appear on the display. The
meter is now ready to perform a blood glucose test.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH