Accu-Chek ACTIVE User Manual

44
Testing blood glucose
After the test
The label on the test strip container shows blood
glucose values in mg/dL und mmol/L next to each
colour sample.
1 Look for the value which is closest to your test
result.
Within 30–60 seconds after applying blood:
2 Compare the colour of the control window on the
back of the test strip with the coloured dots on
the label of the test strip container.
If you nd there is a noticeable disparity, repeat the
test. If you cannot obtain a match, even after several
tests, contact your customer support and service
centre.
Only the test results displayed by the meter should be
used for therapeutic decisions. The colour compari-
son serves only as a plausibility check of the test
results.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH