48
Testing blood glucose
You can touch the test eld when you apply blood,
but do not rub the drop of blood into the test eld.
Do not store used test strips in a container which
still contains unused test strips. This could make
the unused test strips unusable. Unusable test
strips can lead to incorrect results.
Please also note the following points, as incorrect
results or error messages can otherwise occur:
Do not bend the test strip while inserting it into the
meter.
Do not to bend or move the test strip before or
while applying blood, or while the test is per-
formed.
Do not apply blood to the test strip before the drop
symbol ashes in the display.
If
or are not shown completely during the
default display check (e.g.
), results cannot be
displayed correctly. In this case, contact your
customer support and service centre.
To Next Page
Loading...
