Accu-Chek ACTIVE User Manual

5
About these Instructions for use
In these Instructions for use you will come across
three kinds of notes. Please read these very care-
fully.
This symbol indicates a possible risk of
injury or of damage to your own health or
the health of others.
This symbol draws attention to actions that
could result in damage to your meter.
i
This symbol draws attention to important
information.
All instructions appear in a coloured frame as shown
below:
1 Insert the test strip into the meter.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH