63
Using the meter as a diary
If there are no results saved for the selected average,
three dashes
are displayed.
The meter calculates the average for a period even
when the saved results cover a shorter period. For
example: Tests were only performed in the last 5
days. In this case, the results of the last 5 days are
used to calculate the averages for all three periods
(7, 14 and 30 days).
In the event that you changed the date or time,
performed a test and then re-set the date/time, only
those test results that the meter saved in uninter-
rupted chronological order will be taken into account.
If the chronological order has been interrupted, the
earlier results will not be taken into account.
You can switch directly from displaying any average
value to testing by inserting a test strip into the
meter.
To Next Page
Loading...
