Accu-Chek ACTIVE User Manual

94
Testing blood glucose in more than one patient – Information for healthcare professionals
9 Encourage a drop of blood to form by gently
massaging the nger towards the ngertip. A
proper drop of blood must form.
10 Apply the drop of blood to the test strip.
We recommend that you apply the blood to the
test strip while it is outside the meter (see
Chapter 5.2, section “Applying blood with the
test strip outside the meter”).

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH