32
P4.2 Selecting °C or °F
You can select between °C and °F units for temperature readings. Meter default is °C.
From measurement mode
1. Press Setup key to enter Set Up mode.
2. Press the ▲ and ▼ keys to scroll through
subgroups until you view parameter P4.0.
See figure
3. Press the ENTER key two times to
select parameter 4.2.
See figure
4. Press the ▲ and ▼ keys to toggle
between °C and °F.
5. Press the ENTER key to confirm selec-
tion and to proceed to step 3 of P.4.3.
Press the CAL/MEAS key twice to
return to measurement mode.
C
C
D
D
To Next Page
Loading...
