Acer P5271 - Chapter 2 Disassembly Process & Assembly Process; Equipment Needed & Product Overview

P5271/P5290/P5390W/P5271i Condential
2-1
Chapter 2
Disassembly & Assembly Process
2-1 Equipment Needed & Product Overview
1. Screw Bit (+): 105
2. Screw Bit (+): 107
3. Screw Bit (-): 107
4. Hex Sleeves 5mm
5. Long Nose Nipper
6. Tweezers
7. Projector
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: - If you need to replace the Main Board, you have to get into Service Mode and record the
lamp usage hour, please refer to section 2-19.
- As the process of P5290/P5390W/P5271i disassembling is the same as P5271, we take
P5271 for example here.