The control and monitoring features of the ACOM 600S, 700S, or 1200S amplifier include the following
functions:
a) Power OFF and ON
Please, see Figure 6-5 Operating of eBox with ACOM 700S, Pos. (a).
b) Ant
Please, see Figure 6-5 Operating of eBox with ACOM 700S, Pos. (b).
Used only when a Remote Automatic Antenna Tuner and Switch ACOM 04AT is installed.
Displayed is the name and number of the actual selected antenna.
c) Forward Power
Please, see Figure 6-5 Operating of eBox with ACOM 700S, Pos. (c).
Forward Power into the antenna: Digital value and bargraph, displayed in [W].
d) Temperature
Please, see Figure 6-5 Operating of eBox with ACOM 700S, Pos. (d).
PA transistor temperature bar graph and readout. Entering the red zone is not allowed.
Displayed temperature in
o
C (degrees Celsius).
e) Reflected Power
Please, see Figure 6-5 Operating of eBox with ACOM 700S, Pos. (e).
Reflected Power from the antenna. Entering in red zone is not allowed.
Digital value and bargraph, displayed in [W].
f) Parameter 1 of 2
Please, see Figure 6-5 Operating of eBox with ACOM 700S, Pos. (f).
The panel displays any one of the following parameters on your choice and their value:
• Drive RF Power
• Output Power
• Forward Power
• Reflected Power
• Load (Antenna) VSWR
• Power Gain
• Bias Left
• Bias Right
• DC Current
• DC Voltage
• Temperature.
To Next Page
Loading...
