ACT ACTsmart2 Series - Adding a Card Batch for Second Door; Adding a PIN for Second Door; Adding a Card and PIN for Second Door; Adding Random Card for Second Door

ACTsmart2 Operating and Installation Manual Rev. 2
Copyright © 2015 Access Control Technology Ltd.
Adding a Card Batch for Second Door:
Adding a PIN for Second Door:
Adding a Card and PIN for Second Door:
Adding Random Card for Second Door:
Step Keypad Entry Operation
1 70
Add Card Batch for Second Door
(I/O function code 12 must be set for the Aux O/P)
2 Present Card First card in Batch (lowest number card)
3 Present Card Last Card in Batch (highest number card)
4 Enter 1-8, (optional)* Select each door this batch enabled for
5
Press
a
End programming card batch. Note: the buzzer will sound while
cards are loaded into memory.
Step Keypad Entry Operation
1 71
Add PINs (Make sure Option 40 is set on PIN and Prox units
(1080).) (I/O function code 12 must be set for the Aux O/P)
2 0001-9999 4 - 6 digit PIN code
3 1-8, (optional)* Select each door this PIN is valid for
4
Press
a
End programming PINs
Step Keypad Entry Operation
1 72
Add Card and PIN (Make sure Option 39 is set on PIN and Prox
units (1080).)
(I/O function code 12 must be set for the Aux O/P)
2 Present Card
3 0001-9999 4 - 6 digit PIN code
4 1-8, (optional)* Select each door this Card & PIN is valid for
5
Press
a
End programming Card and PINs
Step Keypad Entry Operation
1 73
Add random card for Second Door
(I/O function code 12 must be set for the Aux O/P)
2 Enter 1-8, (optional)* Select each door these cards enabled for
3
Press
a
4 Present Card Add card
5 Present Card (optional)* Repeat for all other cards to be added
6
Press
a
End adding cards
14