ACT ACTsmart2 Series User Manual

ACTsmart2 Operating and Installation Manual Rev. 2
Copyright © 2015 Access Control Technology Ltd.
ACTsmart2 Mounting Instructions Surface Mount Unit
© Copyright of Access Control Technology Ltd 2015
Surface Mount Unit
Note: Determine the distance between the patress box and the mounting plate, using the spacers that are labelled 1mm to 4mm. A spacer of the correct length is assembled by stacking the spacers together.
Place the reader / keypad onto the surface mount collar and clip down into place. Use the security screw supplied to attached the unit to the surface mount collar.
The surface mount collar is mounted on the wall using the xing kit supplied in the box.
Spacers break away from main component when required by installer for use
View showing spacer stacking
View shows mounting plate before spacers are broken away by installer
Security screw supplied with the unit
Place the cap onto the unit and push rmly in place
27

ACT ACTsmart2 Series Specifications

General

Brand	ACT
Model	ACTsmart2 Series
Category	Controller
Language	English