Checking Link Status
Open the Link Tab
Auto Update
While the link quality is measured, signal error rate is painted (right-to-left);
CLIENT will only paint Downlink graph (green line) and parameters (green text).
Expected values for quality status indicators are, as follows:
64QAM (excellent), 16QAM (OK)
Est. Power > -80db
greater than 10 dBm separation between Power and Noise
More link information may be obtained by clicking the onscreen “expand” button:
In the BASE GUI, the Link Tab has a second tab, the Link List View, which will provide additional information. For
example, SNR > 30dB indicates a good link.
To Next Page
Loading...
