32 American Dryer Corp. 112144-46
8) The air supply line can now be
connected to the solenoid valve in Port
No. 3 using a 1/8” N.P.T. pipe fitting
(refer to Illustration C on this page).
9) Plug the electrical connector from the
dryer to the mating electrical
connector on the air control plate as
shown in Illustration C on this page.
NOTE: Turning knob on flow control valve clockwise (CW) will restrict airflow. Turning knob on
flow control valve counterclockwise (CCW) will increase airflow.
To Next Page
Loading...
