ADLINK Technology PCI-8102 - Figure 1-1: PCI-8102 Block Diagram

2Introduction
Figure 1-1: PCI-8102 Block Diagram
MotionCreatorPro is a Windows-based application development
software package included with the PCI-8102. MotionCreatorPro
is useful for debugging a motion control system during the design
phase of a project. An on-screen display lists all installed axes
information and I/O signal status of the PCI-8102.
Windows programming libraries are also provided for C++ com-
piler and Visual Basic. Sample programs are provided to illustrate
the operations of the functions.
Figure 1-2 illustrates a flow chart of the recommended process in
using this manual in developing an application. Refer to the
related chapters for details of each step.
P
C
I B
us
PLX905
2
ASIC
SCS
I
68
P1
STA/STP K1&
2
CPLD
ROM
Digital I/O Isolation
16 DI/O P2
VCC
DC/D
C
VDD
+24V
CardID S1