ADLINK Technology PCI-8102 - Switch Setting for Card Index

Installation 17
2.8 Switch Setting for card index
The SW1 switch is used to set the card index. For example, if you
turn 1 to ON and others are OFF. It means the card index as 1.
The value is from 0 to 15. Refer to the following table for details.
Card ID Switch Setting (ON=1)
0 0000
1 0001
2 0010
30011
4 0100
5 0101
60110
70111
8 1000
9 1001
10 1010
11 1011
12 1100
13 1101
14 1110
15 1111