ADLINK Technology PCI-8102 - General-Purpose Signal SVON

30 Signal Connections
3.8 General-Purpose Signal SVON
The SVON signal can be used as a servomotor-on control or gen-
eral purpose output signal. The signal names, pin numbers, and
its axis numbers are shown in the following table:
The output circuit for the SVON signal is shown below:
P1 Pin No Signal Name Axis #
7SVON01
41 SVON1 2
35V @ 50mA Maximum
SVON
From motion IC
EGND
Inside 81
02
P1
VCC
PS2805