ADLINK Technology PCI-8102 - Pulser Input Signals PA and PB

34 Signal Connections
3.12 Pulser Input Signals PA and PB
The PCI-8102 can accept input pulser signals through the pins of
CN3 listed below. The pulses behaves like an encoder. The sig-
nals generate the positioning information, which guides the motor.
P1 Pin No Signal Name Axis # P1 Pin No Signal Name Axis #
26 PA+ 1 2 27 PA- 1 2
28 PB+ 1 2 29 PB- 1 2
Motion IC
PA, PB
PA+_ISO,
PB+_ISO
PA-_ISO,
PB-_ISO
R = 22 Ohm
P1
Inside 8102
C = 2.2 uF
HP0631