ADLINK Technology PCI-8102 - Interrupt Control

158 Function Library
6.13 Interrupt Control
@ Name
_8102_int_control – Enable/Disable INT service
_8102_set_motion_int_factor – Set the factors of
motion related interrupts
_8102_set_gpio_int_factor – Set the factors of
general purpose IO related interrupts
_8102_wait_error_interrupt – Wait error related
interrupts
_8102_wait_motion_interrupt – Wait motion related
interrupts
_8102_wait_gpio_interrupt – Waiting GPIO
interrupts
@ Description
_8102_int_control:
This function is used to enable the Windows interrupt event to host
PC.
_8102_set_motion_int_factor:
This function allows users to select motion related factors to initi-
ate the event int. The error can never be masked once the inter-
rupt service is turned on by _8102_int_control(). Once the
Interrupt function is enabled, you can use
_8102_wait_motion_interrupt() to wait event.
_8102_set_gpio_int_factor:
This function allows users to select GPIO related factors to initiate
the event int. The error can never be masked once the interrupt
service is turned on by _8102_int_control(). Once the Interrupt
function is enabled, you can use _8102_wait_gpio_interrupt() to
wait event.
_8102_wait_error_interrupt:
When user enabled the Interrupt function by _8102_int_control().
He could use this function to wait the errior interrupts.
_8102_wait_motion_interrupt: