142 Function Library
OffsetCx: X-axis offset to center
OffsetCy: Y-axis offset to center
OffsetEx: X-axis offset to end of arc
OffsetEy: Y-axis offset to end of arc
DIR: Specified direction of arc
StrVel: Starting velocity of a velocity profile in units of pulse per
second.
MaxVel: Maximum velocity in units of pulse per second.
Tacc: Specified acceleration time in units of seconds.
Tdec: Specified deceleration time in units of seconds.
SVacc: Specified velocity interval in which S-curve acceleration is
performed.
Note: SVacc = 0, for pure S-Curve. For more details, see
section 4.2.4
SVdec: specified velocity interval in which S-curve deceleration is
performed.
Note: SVdec = 0, for pure S-Curve. For more details, see
section 4.2.4
2
04
1…
Value Meaning
0 Clockwise(cw)
1 Counterclockwise(ccw)
To Next Page
Loading...
