ADLINK Technology PCI-8102 - Page 157

Function Library 147
@ Syntax
C/C++(Windows 2000/XP)
I16 _8102_disable_pulser_input(I16 AxisNo, U16
Disable );
I16 _8102_pulser_pmove(I16 AxisNo, F64 Dist, F64
SpeedLimit);
I16 _8102_pulser_vmove(I16 AxisNo, F64
SpeedLimit);
I16 _8102_set_pulser_ratio(I16 AxisNo, I16 DivF,
I16 MultiF);
I16 _8102_set_pulser_iptmode(I16 AxisNo, I16
InputMode, I16 Inverse);
Visual Basic (Windows 2000/XP)
B_8102_disable_pulser_input(ByVal AxisNo As
Integer, ByVal Disable As Integer) As
Integer
B_8102_pulser_pmove(ByVal AxisNo As Integer,
ByVal Dist As Double, ByVal SpeedLimit As
Double) As Integer
B_8102_pulser_vmove(ByVal AxisNo As Integer,
ByVal SpeedLimit As Double) As Integer
B_8102_set_pulser_ratio(ByVal AxisNo As Integer,
ByVal DivF As Integer, ByVal MultiF As
Integer) As Integer
B_8102_set_pulser_iptmode(ByVal AxisNo As
Integer, ByVal InputMode As Integer, ByVal
Inverse As Integer) As Integer
@ Argument
AxisNo: Axis number designated to move or change position.
card_id Physical axis AxisNo
0
00
11
1
02
13
2
04
1…