Advanced MxPro4 User Manual

10
Section 10
Test Condition.
The C.I.E has provision for testing the installation on a per zone basis. Refer to the
User Manual for further information.
Section 11
Standardised Input/Output interface.
Standardised I/O interfaces are supported over the Ad-Net Network.
1.6 Installation Approvals
1.6.1 Fire System Installations
The panel must be installed and configured for operation in accordance with these instructions and the
applicable code of practice or national standard regulations for fire systems installation (for example BS5839-1:
2002) appropriate to the country and location of the installation.
1.6.2 Wiring Regulations
The panel and system must be installed in accordance with these instructions and the applicable wiring codes
and regulations (for example BS7671) appropriate to the country and location of the installation.
www.acornfiresecurity.com
www.acornfiresecurity.com

Advanced MxPro4 Specifications

General

Brand	Advanced
Model	MxPro4
Category	Control Panel
Language	English